OKUMA LT-300-MY

(1) USED OKUMA LT-300-MY TWIN SPINDLE, TWIN-TURRET TURNING CENTER WITH SUB-SPINDLE AND SMW MAG-TYPE BAR-FEED (MULTI-FUNCTION C & Y MILL DRILL) NEW 2005 SPECIFICATIONS: TRAVEL X AXIS:...................... 10.63" Y AXIS:...................... 6.30" Z AXIS:...................... 36.61" X2 AXIS:..................... 9.06" ZA AXIS:..................... 36.61" ZB AXIS:..................... 36.22" W1 AXIS:..................... 37.01" C1:.......................... 360.000 DEG TRAVERSE RATE (X, Y, Z):............. 1181 X 1024 X 1574 FEED RATE (X, Y, Z):................. 200 IPM MAXIMUM TURNING DIAMETERS:........... 13.8" MAXIMUM TURNING LENGTHS:............. 35.0" MAXIMUM SWING:....................... 21.7" CHUCK DIAMETER:...................... 8.0" BAR CAPACITY:........................ 2.0" NUMBER OF MAIN SPINDLES:............. 2 MAIN SPINDLE 1 NOSE:.............................. A2-6 BORE:.............................. 2.440 " SPEED:............................. 50 - 5000 RPM DRIVE MOTOR (HP):.................. 30.0 RANGE:............................. 1 INDEX INCREMENT (DEGREES):......... 0.001 MAIN SPINDLE 2 NOSE:.............................. A2-6 BORE:.............................. 2.440 " SPEED:............................. 50 - 5000 RPM DRIVE MOTOR (HP):.................. 30.0 RANGE:............................. 1 INDEX INCREMENT (DEGREES):......... 0.001 TOOLING TYPE:........................ UPPER TURRET # OF TOOLS TURNING:................ 12 # OF TOOLS ROTARY:................. 12 TOOL SHANK SIZE SQUARE:............ 1.0" TOOL SHANK SIZE ROUND:............... 1.5" TOOL SHANK SIZE ROTARY:.............. 1.0" HORSE POWER (30 MIN.):............... 9.5 RPM:................................. 4500 MAX. NO SIMULTANEOUS CUTTING TOOLS:.. 2 MACHINE NET WEIGHT(POUNDS):.......... 22000 FLOOR LAYOUT (L X W X H):............ 139" X 96" X 92"EQUIPPED WITH: OKUMA OSP-P100L MULTI-AXIS CONTROL HI-G CONTROL, NC TURRET, HEAVY TOOLING TAPE DATA IN/OUT T-SEPERATE EDIT, EDIT INTERLOCK C, PLANE CONVERSION PROFILE GENERATION, SYNC TAPPING, HELICAL CUTTING, NC TORQUE LIMIT LAP4, NOSE-R 2B, USER TAKS 2, EXP. AUTO CHAMP, PITCH ERROR COMP, TURRET POS COMP, TOOL LIFE MGMT, TOOL WEAR COMP, I/M SWITCH, CYCLE TIME CAL, NC WORK COUNTER & MONITOR, CYCLE TIME CHECK, LOAD MONITOR MAC MAN, THERMAL COMP L2, 2 SADDLE MACH, SERVO LINK NC, SERVO LINK SPDL, PROGRAMING HELP, 3D ANIMATION, SMW MAG-TYPE BAR-FEED