NICCO NSG-6H

(1) USED 12"x24" NICCO MODEL NSG-6H PRECISION HORIZONTAL SPINDLE SURFACE GRINDER, S/N: B4105, NEW 1984 SPECIFICATIONS: WIDTH & LENGTH GROUND................... 12" X 24" LONGITUDINAL TABLE TRAVEL............... 27" CROSSFEED TRAVEL........................ 13" SPINDLE CENTER TO TABLE TOP............. 20" MAX. VERTICAL TRAVEL OF SPINDLE ............. 16" LONGITUDINAL TABLE SPEEDS............... 3-82 FPM AUTO CROSSFEED PER TABLE REVERSAL....... 0.12" TO 0.8" CONTINUOUS CROSSFEED SPEEDS............. 6.6-16' FPM MNL CROSSFEED PER DIV. ON HANDWHEEL..... 0.0005" GRINDING WHEEL SIZE .................... 12" X 1.5" X 3" RAPID TRAVERSE RATE..................... 14" IPM MNL VERT. FEED PER DIV.ON HANDWHEEL.... 0.0001" AUTOMATIC INCREMENTAL DOWNFEED.......... 0.0001" TO .0016" APPROX. MACHINE WEIGHT.................. 4,800 LBS. MACHINE DIMENSIONS ..................... 81" X 60" X 74" EQUIPPED WITH: -AUTOMATIC INCREMENTAL DOWNFEED FOR PLUNGE & SURFACE GRINDING WITH "DEEP CUTTING" (1 TO 30 PASSES) FEATURE - DOWNFEED WILL ALLOW MORE THAN ONE PASS & UP TO 30 OF THE DOWNFEED HANDWHEEL (ONE REV. OF HANDWHEEL IS .04") -SPARKOUT CONTROL (1 TO 30 PASSES) -TABLE PARKS TO THE SIDE @ COMPLETION OF GRIND CYCLE -POWER RAPID WHEELHEAD POSITIONING -HYDRAULIC LONGITUDINAL & CROSS FEEDS -POWER RAPID CROSSFEED -12" X 24" ELECTRO-MAGNETIC CHUCK W/VARIABLE HOLD NEUTROFIER CONTROL. -AUTOMATIC LUBRICATION FOR WAYS & SCREWS -EXTERNAL HYDRAULIC POWER UNIT -COOLANT SYSTEM -MANUAL "OVER-THE-WHEEL" DRESSER -ALL (3) HANDWHEELS @ OPERATOR'S HIP LEVEL -FINE DOWNFEED BY RATCHET MECHANISM (.0001" GRAD.) -EXTERNAL HYDRAULIC SYSTEM, 2 H.P. MOTOR -5 H.P./3/60/220-440 VOLT SPINDLE MOTOR -MACHINE IS PRESENTLY WIRED FOR 220 VOLTS