BRIDGEPORT ROMI M-17

1) USED ROMI MODEL M-17 COMBINATION CNC/MANUAL LATHE NEW 2000, S/N: 00 2084 922 403SPECIFICATIONS: SWING OVER BED 16.93" SWING OVER CROSS SLIDE 8.03" DISTANCE BETWEEN CENTERS 43.46" Z AXIS TRAVEL 42.85" X AXIS TRAVEL 8.66" BED WIDTH 12.01" MAIN MOTOR 10HP SPINDLE SPEED 3000 RPM RAPID TRAVERSE Z AXIS 394 IPM RAPID TRAVERSE X AXIS 295 IPMEQUIPPED WITH: FANUC 21-T CONTROL (see features listed below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