SOCO SB-89X4B-1S

3" SOCO CNC HYDRAULIC TUBE BENDER

MODEL: SB-89X4B-15 NEW 2001

Q U O T A T I O N

Performance Features

1. Capacity for 3-1/2” (88.9 mm) O.D. X 0.095 wall (2.1 mm) Steel Tubing, bending in 1.5 D C.L.R.

Capacity for 3” (76.2 mm) X 0.095 wall (2.4 mm) Stainless Steel Tubing, clockwise rotation.

2. Maximum 10” (250 mm) bending radius in standard model,

3. Maximum feeding length of 112” (2850 mm) in one stroke; maximum tube length with mandrel is 157” (4000 mm) in multiple-stroke feeding method.

4. One stack (1 X Radius) bending.

5. Compression and draw bending capability

6. Simultaneous motion of Y, B & C axes

7. Simultaneous motion of bending Arm (C) & the pressure die assistant (U1) axes, controlled by precision hydraulic proportional (servo) valves.

8. Closed or Open collet bending

9. Carriage Travel Repeatability (Y motion) of +/- 0.10 mm (+/- 0.005”)

10. Collect Rotation Repeatability (B Motion) of +/- 0.10 degrees.

11. Bending Arm Rotation Repeatability (C motion) of +/- 0.10 degrees.

Machine Features

1. Hydraulic programmable mandrel extractor, heavy-duty mandrel lubricator.

2. Clamp and pressure die holders and sliding area semi-automatic lubricator.

3. Springback Compensation – Automatic correction for any differences caused by bending springback.

4. PDI Zone Recapture – Allows the carriage to move into the PDI Zone for any number of bends necessary to complete the part.

5. Standard wiper die holder and drop down clamping system.

6. Remote operator control stand.

7. All electrical circuits with components and machine safety covers are properly built on. A connecting box for the safety mat is also included (safety mat is optional but highly recommended).

Computer Features- IPC with touch screen system

The stand-alone computer with touch screen system includes Windows 98 / 2000 based software

capable of performing the following:

1. Component (Part) Program entries for YBC and XYZ data.

2. Component (Part) Program Data Conversion from XYZ to YBC or from YBC to XYZ values.

3. Component (Part) Program storage on hard disk or floppy.

4. Component (Part) Program reversal and mirror image conversion with graphical display, with ability to rotate parts on the screen in any direction.

5. On screen display of offsets.

6. On screen self diagnostics with the ability to connect to live remote technical service

from Mfg. Outlet (Optional items: PC Anywhere software / Modem).

7. Ability to network between bender controls and a master computer.

8. Ability to store over 50,000 configuration files in 10 GB of disk space, as well as

opening 9 unique files at one time for greater bend setting flexibility.

9. Ability to receive AutoCAD data from a master computer (Free LSP software is available).

10. Hardware consists of a touch screen interface linked to closed-loop servo controlled technology.

Capacities and Specifications

Max. Steel Tube O.D. (C.L.R. 1.5D) 3-1/2” x .095” or 3”×.125”

Max. Stainless Steel Tube O.D. (C.L.R. 1.5D) 3” x .095”

Max. Tube Length With Mandrel (extensions optional) 157” / 13’1”

Max. Feeding Stroke 112” / 9’4”

Tube Feeding Way

1.Feed In Order

2.Gripper Feeding

Max. Bending Radius (extensions available) 10”

Max. Bending Angle 190°

Number Of Bend Per Tube 12 bends

Max. Program Storage Facility 50,000

Working Speed Bending Speed Max.25°/sec

Plane of Bend Speed Max. 160°/Sec

Feeding Speed Max. 31.5”/sec

Mechanical Bending Precision ±0.1°

Planning Precision ±0.1°

Feeding Precision ±0.005 mm

Data Input Way

1. Coordinate(X.Y.Z)

2. Actual Value(Y.B.C)

Planning (B) Servo Power 1.0 Kw

Feeding (Y) Servo Power 3.5 Kw

Motor Power For Hydraulic 30 Hp

Gross Weight 16,060 lbs.

Machine Dimension L×W×H 195”×73”×61”