DAREX M

(1) USED DAREX M-5 SERIES END MILL SHARPENER - S/N: 52049Features:-Sharpen an Infinite Variety of Drill Points on drills from 1/16" to 3/4" (1.5mm - 19mm)-Create any Point Angle from 90 to 180 degrees.-Clearance Angles from 0 to 30 degrees.-Nine Different Point Styles, Including: Split points Chamfered Helical S PointsSpecifications:-Point angel adjustment: 90 to 180 deg-Points grinding accuracy: meets or exceed national aerospace standard 907 lip height of .002" TIV-Grinding wheels type: Sharpening CBN & point-split CBN-Average Cycle Time: Typically a 1/16" drill bit can be sharpened within 30 seconds and a 3/4" drill bit will take up to 60 seconds, material removal is adjustableMotor: Horsepower: 1/3 R.P.M.: 3,450 Amps: 4.2 Volts: 115 Electrical: 115 Volt, Single PhaseEquipped With: 2 Grinding Wheels Work light Drill holding fixtures (Comes as shown in photos, as removed from aerospace R&D shop)