HARDINGE CHNC 1

1) USED HARDINGE CHNC I CNC LATHE

SPECIFICATIONS:

SPINDLE CONFIGURATION: ANSI A2-5"

HOLE THROUGH SPINDLE: 1.875"

16C COLLET CAPACITY: 1-5/8"

SPINDLE SPEED RANGE (1-RPM STEPS): 50 TO 5000 RPM

AC SPINDLE DRIVE (30-MINUTE RATING): 10 HP

CAPACITY

MAXIMUM SWING OVER BED: 14.000"

MAXIMUM THREADING DIAMETER: 8.000"

MAXIMUM TURNING DIAMETER: 8.000"

MAXIMUM FIXTURE DIAMETER: 9.000"

MAXIMUM ALLOWABLE WEIGHT ON SPINDLE

(INCLUDING WORKHOLDING DEVICE): 75 LBS.

TURRET

NUMBER OF STATIONS: 8

SQUARE TOOL SIZE (STANDARD): 1/2

ROUND TOOL DIAMETER (STANDARD): UP TO 3/4"

MAXIMUM X-AXIS TRAVEL: 4.500"

MAXIMUM Z-AXIS TRAVEL: 12.00"

MAXIMUM X-AXIS TRAVERSE RATE: 400 IPM

MAXIMUM Z-AXIS TRAVERSE RATE: 400 IPM

MAXIMUM DISTANCE FROM TURRET FACE

TO SPINDLE: 12.500"

INDEXING TIME (STATION 1 TO 8): 2 SECONDS

INDEXING TIME (STATION-TO-STATION): 1 SECOND

MISCELLANEOUS

LEAST INPUT INCREMENT: 0.00010

LEAST COMMAND INCREMENT: 0.00010

COMPRESSED AIR REQUIREMENT: 70 MIN. TO 90 MAX. PSI

5 TO 6 SCFM

MAX. RECOMMENDED AMBIENT OPERATING

TEMPERATURE: 113 DEG. F

COOLANT SUMP CAPACITY: 30 U.S. GAL

APPROX. SKIDDED WEIGHT: 6000 LBS.

MACHINE DIMENSIONS: 91.500" L X 65" D X 66" H

HEIGHT WITH GUARD DOOR RAISED: 89.750"

ELECTRICS: 230 VOLTS, 3 PHASE, 60 CYCLE

EQUIPPED WITH:

FANUC NUMERICAL CNC CONTROL