HAAS VM3

ONE (1) USED HAAS VM3 CNC VERTICAL MACHINING CENTER NEW: 2006 SPECIFICATIONS TRAVELS: MAXIMUM X AXIS: 40 " MAXIMUM Y AXIS: 26 " MAXIMUM Z AXIS: 25 " SPINDLE NOSE TO TABLE (~ MIN): 4.5 " SPINDLE NOSE TO TABLE (~ MAX): 29 " STANDARD TABLE: LENGTH: 54 " WIDTH: 25 " MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED): 3500 LB SPINDLE: TAPER SIZE: BT/40 SPINDLE MAX SPEED: 12,000 RPM DRIVE SYSTEM INLINE DIRECT DRIVE MAX TORQUE STANDARD: 75 FT-LB @ 2100 RPM SPINDLE MOTOR MAX. RATING: 30 HP AXIS MOTORS: MAX THRUST RATING X: 5600 LB MAX THRUST RATING Y: 5600 LB MAX THRUST RATING Z: 5600 LB FEEDRATES: RAPIDS ON X AXIS: 710 IN/MIN RAPIDS ON Y AXIS: 710 IN/MIN RAPIDS ON Z AXIS: 710 IN/MIN MAX CUTTING: 500 IN/MIN TOOL CHANGER: MAX TOOL DIAMETER STD (ADJACENT EMPTY): 5.0 " MAX TOOL DIAMETER STD (FULL): 3.0 " MAXIMUM TOOL WEIGHT: 12 LB CAPACITY STANDARD: 24 CHANGER TYPE SMTC TOOL-TO-TOOL (AVG): 2.8 SEC CHIP-TO-CHIP (AVG): 3.6 SEC GENERAL: DOOR OPENING WIDTH: 48.5 " POWER REQUIRED(CONTINUOUS): 28 KVA;208 VAC@ 100A 3-PHASE: 50-60 HZ MACHINE WEIGHT: 14000 LB AIR REQUIRED: 4 SCFM, 100 PSI EQUIPPED WITH: LOW HOURS CHIP AUGER PROGRAMMABLE COOLANT 12,000 RPM