OKUMA & HOWA 2SP-25HG

(1) USED OKUMA & HOWA ACT2SP-25HG CNC TWIN SPINDLE TURNING CENTER - NEW 2005SPECIFICATIONS: BASE MACHINE CAPACITY: MAXIMUM CUTTING DIAMETER 13.78" MAXIMUM CUTTING LENGTH 7.87" DISTACE BETWEEN SPINDLES 15.75" SPINDLE CENTER HEIGHT FROM FLOOR 47.44" SPINDLE MOTORS 25 HP SPINDLE SPEED RANGE 45-4500 RPM STANDARD CHUCK DIAMETER 10" 3- Jaw SPINDLE NOSE A2-6 DRAWTUBE THROUGH HOLE DIAMETER 2.01" FRONT BEARING DIAMETER 3.94" MAXIMUM WEIGHT ON SPINDLE W/CHUCK 242 LBS X AXIS TRAVEL 6.89" Z AXIS TRAVEL 8.27" X & Z AXIS RAPID TRAVERSE RATE 945 IPM FEEDRATES 0.0001 - 5.24 IPR TURRET TYPE V10 + V10 INDEXING TIME(STATION TO STATION) 0.2 SEC. STANDARD TOOL SIZE 1.0" X 1.0" MAXIMUM BORING BAR SIZE 1.75" OD MACHINE HEIGHT 126" FLOOR SPACE REQUIREDMENT 113.4" X 161.5" WEIGHT 15,432 LBS CNC LOADER SPECIFICATIONS: 3-AXIS SINGLE ARM CNC GANTRY LOADER WITH TURN OVER STATION, UP TO 4,724 IPM, (16) STATION RIGHT SIDE ROTARY STACKER UNIT, 3 JAW LOADERS CHUCKS, TWO ACTUATORS. MAX. WORKPIECE DIAMETER 7.87" MAX. WORKPIECE LENGTH 4.72" MAX. WORKPIECE WEIGHT 17.6 LBS SPEED - LONG. & VERT (A & B AXIS) 4724 IPM A AXIS STROKE 77.17" B-AXIS STROKE 33.46" HORIZONTAL (IN/OUT) C AXIS SPPED 1575 IPM C AXIS STROKE 11.02" LOADING TIME 8 SECONDS MINIMUM CYCLE TIME 35 SECONDS LOADER AND TURNOVER CHUCKS: JAW STROKE 1.26" ACTUATION METHOD FORCED AIREQUIPPED WITH THE FOLLOWING: 2-AUTOMATIC GANTRY LOADERS WITH (16) STATION PALLET POOL FANUC 21i CNC CONTROL TOOL LIFE MANAGEMENT REAR DISCHARGE CHIP CONVEYOR COOLANT TANK (2) OPTIONAL 10" 3-Jaw Chuck