OKUMA LT-300BB-MY

(1) USED OKUMA LT-300BB-MY TWIN SPINDLE, TWIN-TURRET TURNING CENTER WITH SUB-SPINDLE (MULTI-FUNCTION C & Y MILL DRILL) NEW 2004 SPECIFICATIONS: SWING OVER BED 21.65" MAX. DISTANCE BETWEEN SPINDLE NOSES 47.24" MAX TURNING DIAMETER 13.78" MAX MACHINING LENGTH 35" SPINDLE #1 SPINDLE NOSE A2-8" BORE DIAMETER 3.15" BAR WORK CAPACITY 2.5" RANGE OF SPINDLE SPEED (Main & Sub) 40-4000 RPM C-AXIS INDEXING (Main & Sub) .001 Deg. Y-AXIS TRAVEL (UPPER TURRET ONLY) 6.30" (-3.15"-+3.15") CROSS-SLIDE TRAVEL (XA-AXIS) 10.63" (XB-AXIS) 9.06" LONGITUDINAL TRAVEL (ZA-AXIS) 36.61" (ZB-AXIS) 36.22" (W-AXIS) 37.01" RAPID TRAVERSSE SPEED (Z-AXIS) 1574 IPM (X-AXIS) 1181 IPM (W-AXIS) 1574 IPM (Y-AXIS) 1024 IPM TYPE AND NO OF TOOL STATIONS TURRET NO.1 (12 Rotary) AUTO VERT. V 12 TURRET NO.2 (12 Rotary) AUTO VERT. V 12 MAIN SPINDLE DRIVE MOTOR (MAIN & SUB) 30/20 HP ROTARY TOOL SPINDLE SPEED 100-4500 RPM ROTARY TOOL HORSE POWER 9.5 HP MACHINE WEIGHT 26,000 LBS. EQUIPPED WITH: OSP E100L COLOR CNC CONTROL 1 TOUCH IGF WITH TOOL PRESETTER Y-HORI. BARRIER HI-G CONTROL NC TURRET HEAVY TOOLING B-TURRET SUB SPINDLE MULTIPLE MACHINING B-TURRET M-AXIS SERVO LINK NCS SERVO LINK SPINDLE TAPE DATA IN/OUT T-SEPARATE EDIT BUFFER 320 METERS PLANE CONVERSION PROFILE GENERATION SYNCHRO TAPPING HELICAL CUTTING HARMONIC SPINDLE SP. N/C TORQUE LIMIT. LAP 4 NOSE-R 2B USER TASK 2 EXP. AUTO CHAMFER PROGRAMMING HELP HELP E100 SPEC. 3D ANIMATION ANIMATION U100/U10 SPEC. PITCH ERROR COMPENSATION TURRET POS. COMP. TOOL LIFE MANAGEMENT TOOL WEAR COMPENSATION I/M SWITCH CYCLE TIME CALCULATION CYCLE TIME RE. NEW N/C WORK COUNTER N/C WORK MONITOR CYCLE TIME CHECK LOAD MONITOR MAC MAN THERMAL COMP L2 PLC SPINDLE ORIENTATION M-AXIS ORIENTATION SPINDLE MAX. IL. PARTS CATCHER SMW SELF CONTAINED AIR COLLET CHUCK LEFT SPINDLE (MOUNTED) HYDRAULIC COLLET CHUCK RIGHT SPINDLE (MOUNTED) (2) 10" 3 JAW HYDRAULIC CHUCKS (BOXED) WITH ACTUATOR AND DRAW TUBE CHUCK GRASP CONFIRMATION SPINDLE ORIENT ELECTRIC N/C TURRET WITH BRAKE M-AXIS ORIENTATION B-TURRET M-AXIS (2) GRUNFOSS HIGH PRESSURE 75 PSI COOLANT PUMPS (2) GRAYMILLS 120 PSI PUMPS WITH SEPARATE COOLANT RESERVOIR BAR FEED INTERFACE LOAD MONITOR MULTI TAP TRANSFORMER Y AXIS MILLING OPTION DUAL CHIP CONVEYORS (REAR DISCHARGE) CYCLE TIME REDUCTION C-X AXIS CONTOURING FUNCTION (22) TURNING , FACING, BORING HEADS (7) STRAIGHT MILLING HEADS (6) RT. ANGLE MILLING HEADS ALL STANDARD TURRET HOLDERS ALL AVAILABLE MANUALS