PAR DGO-107

(1) LARGE AEROSPACE GANTRY HIGH-ACCURACY WELDER MANIPULATOR W/ INTEGRATED VIDEO CAMERAYEAR BUILT: 2007 - NEVER USED*********************************************************** THIS IS NOT A MACHINING CENTER AS PREVIOUSLY OFFERED - IT CAN BE CONVERTED TO A HORIZONTAL MACHINING CENTER***********************************************************CONDITION: PRESTINESPECIFICATIONS: X-AXIS TRAVEL BED: OVER 12"* Y-AXIS TRAVEL BED: OVER 40" Z-AXIS TRAVEL BED: OVER 40"*THE CLAMPING FIXTURE (BULKHEAD BETWEEN COLUMNS) IS UNIQUE TO THIS MACHINE. REMOVAL GIVES THE USER A MUCH BIGGER WORKING ENVELOPE. THE TWO-LEGGED PEDISTAL CAN BE MOUNTED TO A RAIL (NOT INCLUDED) AND THE X-TRAVEL CAN BE EXTENDED AS NEEDED.EQUIPPED WITH: INTEGRATED VIDEO CAMERA 8-AXES READY - 8 DRIVERS IN THE COMPUTER CABINET ALL READY TO BE WIRED UP TO A TABLE ALL DRAWINGS INCLUDING FOUNDATION DRAWINGSDOES NOT INCLUDE THE FOLLOWING: X- TRAVEL RAILS TABLE SPINDLE==========================================================This machine was built with multiple systems, eight Bosch Rexrothmotor drives (8 axes) and backup systems to do a number of tasks.They utilized Renishaw Resolute absolute rotary encoder rings forhigher accuracy to make a variety of very precise parts utilizinga horizontal gantry design, to provide the needed stability,recision and repeatable accuracy.Again, this machine is in brand new condition, never used. Aspindle was never even mounted. All the electric wiring is there,tagged and documented.All motors are connected with fiber optic cables. All motors arebrushless. All systems are redundant to avoid down time. Theflexible design of the System allows you to meet your changingneeds from short-term projects to intricate, extendedmanufacturing. It provides extreme stability, speed and both highaccuracy and productivity. You should have no problem processinglarge work as well as moderate sized work with great accuracy.This machining center was built from its concept as a high techaerospace machining center with very tight tolerances, for amajor aerospace company. All materials and components used in theconstruction are of the highest quality and craftsmanship. ####### THE ORIGINAL COST WHEN IT WAS DELIVERED ####### ####### IN LATE 2007 WAS OVER A MILLION DOLLARS #######It was tested, paid for, but never installed or used. Theproject was cancelled after it was purchased.The Camera alone cost $80K and was never used. Inspection canbe done immediately after processing your part.It has two Renishaw Rotational 370 degrees wrist axes. Incombination they can be focused to reach any location.Wired for eight axes. Has 8 drivers in the computer cabinet allready to wire up your table.Foundation drawings are available as are all the drawings.