2004 DOOSAN PUMA 240MSB

SPECIFICATIONS:

Swing over bed 21.7"

Swing over carriage 15.4"

Max. turning diameter 11.4"

Distance spndles 32.3”

Spindle speed RPM range 50 – 5,000

Spindle nose ASA-A2-6

Draw tube I.D. 2.60"

Spindle bore diameter 2.99"

AC spindle motor (30 min.) 25HP

X axis travel 8”

Z, B axis travel 22.8"

Angle of slant bed 45 degrees

X axis rapid traverse rate 945 IPM

Z axis rapid traverse rate 1200 IPM

Number of tools 12 

C-axis min. programmable angle .001°

C-axis rapid traverse rate (RPM) 200

Rotating tool speed 50 - 5,000 RPM 

Rotating tool spindle motor 7.5 Hp

Sub-Spindle speed (RPM) 60 - 6,000

Sub-Spindle motor 7.5 Hp

Spindle nose 110 mm (flat)

Draw tube I.D. 1.38"

Rapid traverse rate 800 IPM

Floor space (Length X Width) 130" x 66"

Machine weight 9,820 lbs

Equipped With (subject to buyer verification):

Fanuc 21iTB Control

Chip Conveyor

Main Spindle: Flex-e-on 30mm F20 30mm Collet Chuck

Sub Spindle: Flex-e-on F18 30mm Collet Chuck

LNS Quick Load Servo S3 Barfeeder
Tool Holders: 5- Stick holders

2- 11/2 in. Bore holders

2- ¾ in. Bore holders

EQUIPPED WITH:

Control: Fanuc 21i-TB

Hydraulic Chuck  Flex-E-On Inc.      
Drive: FX830 AUK,  F20 30mm
Spindale:  FX520 AWP,  F18 30mm
Chip Conveyor
 
Tool Holders:  
5- Stick holders
2- 11/2 in. Bore holders
2- ¾ in. Bore holders