1999 DAEWOO PUMA 200LC

Daewoo Puma 200LC CNC Lathe
Year:1999   
 
SPECIFICATIONS:
 Swing Over Bed: 21.0"
 Swing Over Carriage: 13.0"
 Distance Between Centers: 26.3"
 Maximum Turning Diameter: 13.8"
 Maximum Turning Length: 21.6"
 
 Spindle Speed: 45-4,500 RPM
 Spindle Nose: A2-6
 Draw Tube I.D.: 2.56"
 Spindle Bore Diameter: 2.99"
 Spindle Motor: 20 HP
 Chuck Size: 8.25"
 
 X Axis Travel: 9.3"
 Z Axis Travel: 22.8"
 X Axis Rapid Traverse Rate: 800 IPM
 Z Axis Rapid Traverse Rate: 1,000 IPM
 X Axis Repeatability: ± 0.00006"
 Z Axis Repeatability: ± 0.00008"
 
 Turret Capacity: 12
 Turret Index Time (next station): 0.15 seconds
 Tool Selection: Bi-directional
 Turret Index Repeatability: ±.0005 degrees
 
 Tailstock quill diameter: 3.0"
 Tailstock quill stroke (programmable): 3.1"
 Tailstock Spindle Taper: MT #4
 
 Floor Space: 124" x 62"
 Machine Weight: 9,230 LBS
 Voltage Required: 205/235 Volt / 3 Phase
 
EQUIPPED WITH:
 Fanuc 18-T Control
 Collet Pad System
 Chip Conveyor
 Parts Catcher
 Tool Setter
 Tailstock
 8" Chuck
 Available Manuals

Less than 500 total hours

Spindle bearings & Hydraulic pump has been replaced