2010 SUNNEN ML-4000-D

SUNNEN PRECISION POWER STROKING HONING MACHINE
 
MODEL: ML-4000      S/N: 4J1-1097      NEW:  2010
 
SPECIFICATIONS:
MANUAL STROKE DIAMETER …….. 0.060" TO 6.500"
POWER STROKE DIAMETER ……… 0.060 TO 4.000"
AUTOMATIC SIZING DIAMETER ….. 0.125" TO 2.000"
STROKE LENGTH …………….. 0.236" TO 6.700"
SPINDLE SPEEDS ……………. 200 TO 3000 RPM
STROKE RATE ………………. 60 TO 500 SPM (FINE INCREMENTS)
SPINDLE MOTOR …………….. 5.5 HP
STROKER MOTOR …………….. 1.5 HP
PUMP MOTOR ……………….. 1/2 HP
COOLANT PUMP ……………… 3 GALLONS PER MINUTE
COOLANT CAPACITY ………….. 32 GALLONS
FLOOR SPACE ………………. 64" X 48" X 75" HIGH
MACHINE WEIGHT ……………. 1,875 LBS.
 
EQUIPPED WITH: 
FULLY AUTOMATIC CYCLE
AUTOMATIC STONE WEAR COMPENSATOR
FEED REGULATOR SYSTEM
   "For special applications, the feed regulator system
     can be used to improve stone life or to set the 
     machine to a constant feed rate."
DUAL FEED PRESSURE SYSTEM, ROUGH & FINISH IN ONE OPERATION
MAXIMUM FEED PRESSURE FLEXIBILITY
  "Two-stage feed pressure feature, the operator can 
    reduce cycle time by removing the bulk of the 
    stock at a high feed pressure and finishing
    at a lower pressure.  Pressure settings range
    from 1 to 16. The operator selects the stock 
    removal and pressure for each stage.  
    Maintains accuracy along with improved cycle time."
RIGID MACHINE BASE
ELECTRONIC CONTROL SYSTEM
AUTO POWER STROKING
AUTO SIZING CAPABILITY (MUST PURCHASE PLUGS/ACCESSORIES FROM SUNNEN)
DETACHABLE COOLANT CART SYSTEM
3/60/230-460 ELECTRICS
 
SPECIAL NOTE:
PARTS & SERVICE AVAILABLE FROM SUNNEN (OEM).
 
** "AS NEW" CONDITION & APPEARANCE - ALL ORIGINAL  **
** 239.8 HOURS ON METER - WOW! **
** INSPECT UNDER POWER IN OUR WAREHOUSE **