LEBLOND MAKINO BARON 60

              27" X 120" LEBLOND MAKINO SLANT BED CNC TURNING CENTER
 
 MODEL: BARON 60
 
 GENERAL SPECIFICATIONS:
 SWING OVER BED, DIAMETER............... 27"
 SWING OVER CARRIAGE.................... 20"
 DISTANCE BETWEEN CENTERS............... 120"
 APPROX. WEIGHT......................... 28,000 LBS
 BED:
 DESIGN................................. 60 DEG. SLANT, DOUBLE TORQUE TUBE  NUMBER OF WAYS......................... 3  SIZE OF WAYS:
 TOP WAY................................ 3.8" X 2.8"
 CENTER WAY............................. 4.9" X 1.6"
 BOTTOM WAY............................. 3.8" X 1.8"
 WIDTH ACROSS WAYS...................... 39.4"
 WIDTH ACROSS CARRIAGE WAYS............. 25.3"
 NUMBER OF LEGS......................... 5
 HEADSTOCK:
 HOLE THROUGH SPINDLE................... 4.62"
 BAR CAPACITY WITH 12" CHUCK............ 3"
 BAR CAP. WITH 15", 18" OR 21" CHUCK.... 4"
 SPINDLE NOSE (ASA)..................... A1-11  SPINDLE ID TAPER....................... 500 ASA  SPINDLE CENTER......................... #5 MT  GEAR RANGES, HYDRAULIC CLUTCH CNC...... 3  SPINDLE SPEED RANGES................... 25 - 3000 RPM  SPINDLE SPEED INCREMENT................ 1  CONSTANT SURFACE SPEED................. STANDARD
 TAILSTOCK:
 LENGTH ON BED.......................... 27"
 CENTER SIZE............................ #5 MT  QUILL DIAMETER......................... 5.25"
 QUILL TRAVEL........................... 6"
 CONTINUOUS THRUST @ 3000 ROM........... 1500 - 5000 LBS  LOAD CAPACITY, PART BETWEEN CENTERS.... 10000 LBS
 CARRIAGE:
 LENGTH ON BED:
 UPPER WAY.............................. 36"
 LOWER WAY.............................. 29"
 WIDTH ACROSS TURRET SLIDE WAYS......... 19"
 TRAVEL................................. 123.5"
 BALL SCREW DIAMETER.................... 2.5"
 TYPE OF DRIVE.......................... DC-SCR  AXIS THRUST, CONTINUOUS................ 6500 LBS  TRAVERSE RATE.......................... 400 IPM  FEEDRATE RANGE......................... 0 - 200 IPM  FEEDRATE INCREMENT..................... 0.01 IPM  MAX. THREADING RATE.................... 200 IPM  POSITIONING ACCURACY, RANDOM ABSOLUTE.. 0.001"/24"
 POSITIONING REPEATABILITY
  (UNIDIRECTIONAL)...................... 0.0003"
 TURRET SLIDE WAYS...................... 1.8" X 3.8"
 TURRET:
 TURRET DIAMETER........................ 29.25"
 CLAMPING FORCE......................... 40000 LBS  OD TOOL SHANK SIZE..................... 1.5" X 1.5" X 6"
 MAX. ID TOOL DIAMETER.................. 2.5"
 MAIN MOTOR............................. 50/60 HP
 
 SPECIFICATIONS SUBJECT TO VERIFICATION
 
 FEATURES & EQUIPPED WITH:
 
 FANUC 21i-T CNC CONTROL RETRO-FIT 2011
 
 2) HYDRAULIC STEADY RESTS,
 24" 4-JAW CHUCK
 FULL ENCLOSURE
 FULL LENTH CHIP CONVEYOR