2017 CMS AQUATEC 3040 5-AXIS

13' x 22' CMS Aquatec 3400 + 3400 5-Axis Twin Table CNC Waterjet System
New: 2017

More pictures and videos available here:
https://www.dropbox.com/sh/egoqo8v2tgqfrqx/AADIOyJJD0-NQZ2i07IPSs9ka?dl=0

STANDARD TECHNICAL FEATURES *
X Axis stroke 4020/ 158 Mm (“)
Y Axis stroke TO BE DEFINED mm(“) Approx 22’
Z Axis stroke 530/ mm(“)
X axes max feedrate 54000 mm/ min
Y axes max feedrate 54000 mm/ min
Z axes max feedrate 12600 mm/ min
X acceleration 2 m/ s2
Y acceleration 2 m/ s2
Z acceleration 1 m/ s2
XY Worktable area regular table 4000 x 2000(157.4 x 78.7) mm(“)
XY Worktable area regular table 4000 x 3000(157.4 x 118.1) mm(“)
Loading capacity 1000 Kg/ m2
Dynamic precision + / - 0,10 mm
Repeatability “ Ps” + / - 0,025 mm
Power 13 kW
Total Size LxDxH (with light barriers) TO BE DEFINED mm
Weight TO BE DEFINED Kg
 
A 5 Axes Head provides 5 axes capability to the machine allowing chamfer and 3D cutting, produces more accurate parts at significantly higher cutting speeds than parts cut with conventional systems.
 
STANDARD TECHNICAL FEATURES *
B Axis +/- 60 °
C Axis +/- 340 °
B axes max feedrate 17200 °/min
C axes max feedrate 13400 °/min
B acceleration 1450 °/s2
C acceleration 850 °/s2
 
WORKING IN AREA 1 (2) AND LOADING/UNLOADING AREA 2 (1)
The machine allows to stop the photocells in area 2 (1) without interrupting the working operations in area 1 (2) only in the working unit is in area 1 (2), with photocells between the tanks activated.
The safety is granted by the photocells and the area limit switches avoiding the working unit to enter the area 2 (1) for loading/unloading.
 
Working area n°1 (front side)
X = 4000mm (X=0 right limit - X=-4000 left limit)
Y / V = 3000mm (Y=0 front limit – Y= to be defined rear limit)
 
Working area n°2 (rear side)
X = 4000mm (X=0 right limit - X=-4000 left limit)
Y / V = 3000mm (Y=3300 front limit – Y= to be defined rear limit)
 
PRESSURIZED ABRASIVE CONVEYING SYSTEM (330 KG
NUMERICAL CONTROL OSAI OPEN-M
 
PORTABLE CONTROL UNIT WITH REMOTE COMMANDS UP TO 6 AXES
 
DREDGE FOR ABRASIVE REMOVAL FROM THE TANK: 1ST DREDGE FOR 3040 TANK AND 2ND DREDGE FOR 3040 TANK
PROGRAMMING SOFTWARE EASYJET 5 AXES
It is a CAD/CAM software package installed in a personal computer working in Windows for the generation of work programs.
QTY (1) DDX PHOTO LICENSE & QTY (2) CAMERA IN ENCLOSURE & QTY (2) CAMERA STANDS
HIGH PRESSURE INTENSIFIER POWER 60 HP – PRESSURE 4130 BAR
JETPOWER EVO TECHNICAL FEATURES
 
Installed Power 60 (45) HP (kW)
Voltage (three-phase) 400 ± 5% Volt 50 - 60 Hz
Max water pressure 413,7 Mpa (60.000 PSI)
Max flow rate 5 (1.32) liters/minute (gal/min)
Water consumption from 0 to 5 (1.32) lliters/minute (gal/min)
Max diameter of the orifice 0,40 millimeters
Oil tank capacity 250 (39.6) liters (gal)
Cooling requirements Oil/water heat exchanger* 3.2 gal/min water @ max 70ºF *
Dimensions 36" (900) x 59" (1500) x 58" (1560) H Inch/millimeters
Weight 1350 kg
 
Notes:
This machine replaces for over $550,000 today has low hours use and is immediately available.
For application assistace contact CMS America, Mr. Roberto Impellitiere 616-250-5380