2014 STUDER S30-1

13.8" x 25.6" Studer #S30-1 Universal Cylindrical Grinder
New: 2014   S/N: S30-1
Equipped with:
Hours: 2740
Options included: See photos for items like forming tool, dressers, chuck, steady rest, wheel arbors / hubs, arbor for balancer, guard, etc
Coolant system (option included): Paper Band Filter 100 gal for emulsionwith coolant tanks and pump 30 GPM / 35PSI (Orig price $9800)
Dressing (options included): (Orig price over $500)
Single Point Diamond 0.1 Carat with Fitting taper MT1 (clamping length 40mm / 1.57")
Needle Fliese Type DV/10 NX, Ht 10mm / .39" length, 18mm / .71" with fitting taper MT1 shortened (clamping length 19mm / .75")
Workhead tooling (Option included): Orig price $4000
3-Jaw manual chuck; 160mm / 6.3" dia, fitted for MT5
Center Tool (included, Orig option price over $1000)
Adaptor for centers MT3 for fitting tape MT5
Drivers for 10-50mm dia. / .39 - 1.97", set consisting of ever 1 pieces for workpiece dia up to max of 10mm / 1.57" dia.
Grinding Wheel Form (option included, orig price over $500)
1 dia 400 x 40 x 127mm (15.75 x 1.574 x5")

Steady RestOriginal list price, in 2014, was over $293,000.

Specifications:
SWING           13.8"
CENTERS      25.6"
POWER          10 hp
WORKHEAD SPINDLE SPEED     675 RPM
GRINDING WHEEL DIA.    20"
DIMENSIONS           100" x 100" x 47"
WEIGHT        8,360 lbs
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. 
 
General Specifications:
Maximum Swing: 13.8”
Center Height: 6.9”
Center Distance: 25.6”
Grinding Length: 25.6”
Work Piece Weight: 286 Lbs
X-Axis Travels: 10.2”
Z-Axis Travels: 27.6”
Longitudinal Axis Z with Hydraulic Drive
Max travel, center dist +50mm / 1.97"
Speed 50-5000 mm/min / 2-197rpm
Reversal Dwell 0-6s
Min Automatic travel1.5mm  / .06"
Standard Grinding Wheel: 20” x 2.5”/3.1”
Spindle Taper: #5 MT
Spindle Motor: 10 HP
Handwheel Graduation: 0.0001"
Automatic In-Feed/Course Feeds: 0.0005" - .236"
Medium Feeds: 0.0005" - .047"
Fine Feeds: 0.0005" - .236"
Table Speed: 18.33 FPM
Dwell at Table Reversal: 0-6 Seconds
Swivel of Table: 12 Degrees
Workhead Motor Swivel Toward Grinding Wheel: 90 Degrees
Workhead Spindle Speed: 675 RPM
Machine Dimensions: 100" x 100" x 47"
Machine Weight: 8,360 lbs
Hours: 2740