Unavailable

GLEASON #26 HYPOID GENERATOR

Gear Generators, Bevel
Manufacturer:
GLEASON
Model:
#26 HYPOID GENERATOR
Stock #:
33040
Gleason #26 Hypoid Gear Generator

Gleason Model 26 Hypoid Gear Generator

Specifications:
Max. offset below center                                                    4 1/2"
Max. distance from machine center to nose of spindle   23 1/2"
Min. Distance from machine center to nose of spindle   5"
Cutter speeds- feed per minute                                       35-200
Feed (sec./tooth)                                                              25-333
Main motor - 2 speed                                                      7.5hp
Floor space                                                                       132" x 101"
Net weight                                                                        25,300
Max diameter gear                                                           33"
Cone distance Max (30deg and 18" cutter)                      16 1/2"
Max pitch angle (shaft at 90 deg)                                     84 deg 18'
Min pitch angle                                                                 5 deg 42'
Extreme ratio                                                                     10:1
Max face width                                                                  4"
Dia, pitch                                                                            1 1/2
Dia. of tapper hole at large end                                        6" 152mm
Taper per foot                                                                    3/4" 19mm
Depth of Taper                                                                   6" 152mm
Dia. of hole through                                                          5" 127mm
Spindle nose to machine center                                        9 1/4"  235mm
Cutter Dia.                                                                          9", 12", 16" 18"
Max offset above center                                                    4 1/2"