|
(1) USED 36"x160" POREBA TPK-90A1/3M GAP BED
ENGINE LATHE, S/N: 02-21047-09, NEW APPROX. 1990
SPECIFICATIONS:
SWING OVER BED: 36 1/2" (927 mm)
SWING OVER CROSS SLIDE: 25"
SWING IN GAP: 49"
LENGTH OF GAP: 17"
DISTANCE BETWEEN CENTER: 120" (3048 mm)
SPINDLE BORE: 3 3/4"
SPINDLE NOSE: A1-11
SPINDLE MOTOR: 20/30 HP
SPINDLE SPEEDS (2 RANGES): 7.1-710 RPM
FEEDS - LONG. (122): .0043-.5 IPM
- CROSS (122): .0021-.25 IPM
- TOP SLIDE: .001-.125 IPM
THREADING - INCH 1/4-30 TPI
- METRIC: 1-120 MM/REV
CROSS SLIDE TRAVEL: 18 1/2"
TOP SLIDE TRAVEL: 11 3/4"
RAPID TRAVERSE - LONG./CROSS: 260/130 IPM
- TOP SLIDE: 65 IPM
TAILSTOCK - DRILLING, DIAMETER: 5 1/8"
- DRILLING LENGTH: 40"
- TAPER: #6 MT
- TRAVEL: 11 3/4"
ELECTRICS: 440V/3Ph/60hZ
EQUIPPED WITH:
36" 4-JAW CHUCK
6 WAY POWER CARRIAGE & POWER COMPOUND W/QUICK CHANGE TOOL POST
STEADY REST
2 AXIS DRO
THREAD DIAL
COOLANT SYSTEM
|
