GE FANUC CONTROL,2500 RPM, 15.75" SWING OVER BED,5 MT TAILSTOCK, FLOOD COOLANT

(1) USED 16"x49" HARRISON ALPHA 400 PLUS CNC/MANUAL LATHE
NEW 1998

SPECIFICATIONS:
Height of centers: 8"
Distance between centers: 49"
Swing over bed (saddle wings): 15.75"
Swing over cross slide: 10"
Swing in gap: 23"
Gap width from faceplate: 6 1/2"
Spindle bore: 2"
Spindle nose: Camlock D1-6
Spindle speeds - Low range : 15-300 RPM
Medium range: 35-830 RPM
High range : 110-2500 RPM
Spindle motor: 10 hp
Tailstock travel: 5 1/2"
Tailstock diameter: 3"
Tailstock taper: No. 5 MT
Longitudinal federates:
12 metric feeds: 0.03 - 0.4mm/rev
12 imperial feeds: 0.001 - 0.016 mm/rev
Cross feeds: = half longitudinal values
Rapid power traverse rate: 118 IPM
All threads:
Metric pitches: to 14.0 mm
Imperial pitches to 3.5 MOD
Diametral pitches to 8 DP
Dimensions: 101" x 60" x 68"
Approx. weight: 4700 lbs

EQUIPPED WITH:
Fanuc CNC Teach Control
8" 3 jaw chuck
Flood coolant

INSPECT IN MIDWEST