CHEVALIER FSG-818AD

(1) USED 8"x18" CHEVALIER FSG-818AD 3 AXIS AUTO SURFACE GRINDER NEW 1989SPECIFICATIONS: MAX. GRINDING CAPACITY: 8" X 18" MAX. LONG. TABLE TRAVEL, HYDRAULIC: 20" MAX. LONG. TABLE TRAVEL, MANUAL: 21" MAX. CROSSFEED TRAVEL, AUTOMATIC: 9" MAX. CROSSFEED TRAVEL, MANUAL: 9- 172" DIST. FROM SPINDLE CENTER TO TABLE: 18" VARIABLE TABLE SPEED, HYDRAULIC: 16' TO 98' FPM AUTOMATIC CROSSFEED INCREMENT: 0.02" TO 1/2" CROSSFEED HANDWHEEL, PER GRADUATION: 0.0025" PER REVOLUTION: 0.25" MICROFEED, PER REVOLUTION: 0.005" PER GRADUATION: 0.00005" AUTOMATIC INCREMENTAL DOWNFEED: 0.00005" TO .002" AUTO DOWNFEED DIAL PER GRADUATION: 0.0005" PER REVOLUTION: 0.05" MICROFEED: 0.00005'V.OOOl" RAPID TRAVERSE RATE: 8 IPM SPINDLE MOTOR: 2 HP STANDARD GRINDING WHEEL: 8" DIA. APPROX. WEIGHT: 3,850 LBS APPROX. DIMENSIONS: 85" X 65" X 74"HEQUIPPED WITH: FULLY PROGRAMMABLE (MICROPROCESSOR) AUTO-CYCLE CONTROL AUTOMATIC INCREMENTAL DOWNFEED (PLUNGE & SURFACE) SPARKOUT CYCLE W/AUTOMATIC WHEELHEAD RETRACTION POWER RAPID WHEELHEAD POSITIONING HYDRAULIC TABLE TRAVERSE TABLE RIDES ON HARDENED WAYS W/ LINEAR NEEDLE BEARINGS TABLE, SADDLE & VERTICAL AXES RIDE ON HARDENED & GROUND DOUBLE VEE GUIDE-WAYS W/LINEAR NEEDLE ROLLER BEARINGS POWER CROSSFEED FINE FEEDS FOR CROSS & VERTICAL AXES (.00005" GRAD.) 8" X 18" KANETSU ELECTRO-MAGNETIC CHUCK W/ VARIABLE HOLD NEUTROFEER CONTROL COOLANT SYSTEM W/ PAPER FILTRATION TRAY DUST COLLECTOR FITTING AT GRINDING HEAD EXTERNAL HYDRAULIC SYSTEM AUTO LUBE SYSTEM DIRECT DRIVE SPINDLE WITH OIL COOLED BEARINGS SPINDLE IS 5 H J". 3/60/230-460 VOLTS, Currently Wired for 230 Volts, 3 Phase