CREST ULTRA SONIC CLEANING SYSTEM W/ ROBOT TRANSFER

Crest 5-Station Ultrasonic Cleaning System (W-R-R-R-D) with CTS-1500 Robot Transfer, Load/off-load stations

Specifications:
Note: This unit will be in good working condition and pre-serviced by technicians 
TANK-W 16"
TANK-L 22"
TANK-H 16"
DIMENSIONS 204" x 66" x 96"
 
Equipped With:
5 Stations (W-R-R-R-D) 
CTS-1500 Robot Transfer System
 
System Details:
Power Requirements: 240 Volts, 3-Phase, 60Hz
Overall System Dimensions: 204-1/2" x 66" x 96"
 
Load Station:
Stainless Steel Wing Table
Optical Sensors
Basket Positioners
 
Process Station #1 (Ultrasonic Wash):
16" Left-Right x 22" Front-Back x 16" Deep
4,000 Watts Heat
1,000 Watts Ultrasonics
Rear Side Overflow Weir
Low Liquid Level Safety Protection
Recirculating Pump and Filter System
10 Micron Filter
Plastic Spray Wand
 
Oil Coalescing Chamber:
Installed in the Recirculation Loop of Station #1
System Includes Sparger Bar on Tank #1
 
Process Station #2 (Stage 1 of Reverse Flow Cascade Rinse):
16" Left-Right x 22" Front-Back x 16" Deep
4,000 Watts Heat
1,000 Watts Ultrasonics
Spray Rinse Headers above Immersion Overflow Rinse
 
Process Station #3 (Stage 2 of Reverse Flow Cascade Rinse):
16" Left-Right x 22" Front-Back x 16" Deep
4,000 Watts Heat
Spray Rinse Headers above Immersion Overflow Rinse
 
Process Station #4 (Immersion Rinse):
16" Left-Right x 22" Front-Back x 16" Deep
4,000 Watts Heat
Stainless Steel Spray Gun with Flexible Hose
 
Process Station #5 (High Efficacy Hot Air Dryer):
16" Left-Right x 22" Front-Back x 16" Deep
10 KW Heat
1,100 CFM Blower
Requires 80-100 PSI Clean Dry Air
Automatic Power Sliding Cover
HEPA Filter
 
Crest Rigibot CTS-1500 Transport System:
120 Volts, 60Hz, 1-Phase
7-Day Timer
10 Program Capability
Refer to System Manual in "REFERENCE" for Additional Information 
 
Automation Interface: 
I/O Interface
Automatic Power Sliding Cover (Dryer)
Load and Unload Stations
Basket Positioners