310.909.2020
Sales@Machnet.com

LASER CUTTER




HUGE PRICE REDUCTION!
 2004 Prima Platino CP-3500
3850 Watts
 Laser Cutting System
 
   



 

(1) 3850 WATT PRIMA PLATINO CP-3500 CNC
LASER CUTTING SYSTEM
NEW: 2004

Inv ID: #29251

SPECIFICATIONS:
Travels:                         120" x 60" x 6"
Table Size:                    (2) 5' x 10'
Average Power:            200 to 3700 W    
Power Stability:            +/-2% FS
Wavelength:                  10.6 micrometers

Beam Propogation factor - M2:    
 < 2.4 (typical 2.1 to 2.3)
 
Beam Divergence:                1.5 mrad - half angle
Beam Diameter at Output:    14.5mm 1/e2,  Full Beam Pulsing:                       19mm
Pulse Repetition Rate:           0 - 2 kHz
 
Pulse Width Range:    
Pointing Stability:                     +/- 150 µradians
 
Operating Conditions:    
Ambient Temperature:              10 to 40 Degrees C Relative Humidity:     < 95%
Non Condensing Diode Laser:   (pointing)    
Power Output:                         < 1 milliwatt Wavelength:                             635 nanometers  
Maximum Power Required:      31 kW 
Voltage:          400 VAC - 460 VAC, 3 Phase
 
Cooling :               
Required Cooling Capacity:          36 kW  
Flow Rate:                     133 lpm (35 gpm)
Inlet Temperature:          18 to 20 degrees C Maximum Inlet Pressure:       6 Bar
Nominal Inlet Pressure:         3 Bar
Pressure Differential:             1.5 Bar

Fluid:  Distilled Water with 35% Dowfrost HD
Filter Req's:    100 micrometers
 
Price: 
$320,000
$300,000
Make Offer!

Need to move
out ASAP!


IF YOU ARE INTERESTED IN ANY OF THESE SPECIALS,
PLEASE CALL GENE AT 310-909-2020 Ext. 1001
OR E-MAIL: gene@machnet.com

 
 
 


Machnet is a proud member of the MDNA

Machnet, Incorporated * 2444 Wilshire Blvd, Suite 412 * Santa Monica, CA 90403 * Phone: (310) 909-2020 * Fax: (310) 909-2030
This website is the sole property of Machnet, Inc.  Copyright © 2009 - 2017 Machnet, Incorporated.  All Rights Reserved