(1) TSUGAMI BS-20B MARK II CNC SWISS MACHINE WITH IEMCA BARFEED NEW: 1999, S/N: 611
SPECIFICATIONS: CNC Control: Fanuc LH-1 Maximum Bar Diameter: 3/4" Z1-Axis Travel: 8.21" Main Sprindle Spindle Speed: 200 TO 8,000 RPM Indexing: C-AXIS C-Axis Increment: 0.001 DEGREES Number of Tool Stations: 6 OD, 4 ID, 3 ID/OD B/W TOOLS 4 CROSS DRIVEN TOOLS Tooling Sizes, OD TURNING: 5/8" SQUARE Programmable Servo Axis Designations: "Z1" Main Headstock In and Out: 8.21" "T1" O.D. Tool Slide Up and Down: 5.90" "X1" O.D. Tool Slide Right and Left: 2.00" "X2" I.D. Tool Slide Up and Down: 7.90" Auxiliary Slide Motion: "Z2" I.D. Tool Slide In and Out (Synchronous to "Z1"): 7.88" Sub-Spindle Specifications: Maximum Diameter: 0.787" Maximum Drill Capacity - Mild Steel: 3/8" Maximum Tap Capacity - Mild Steel: 5/16" Speed Range (Serial Interface): 200 TO 7,000 RPM Power Rating: 3.0 HP Sub-Spindle Indexing: 15 Degree increment Part ejection: front or rear ejection Horsepower of Main Spindle: 5.0 HP Driven Tool Drive Motor Rating: 1.5 HP Maximum Speed Cross Tool T10-T12: 200-5,000 RPM Maximum Speed Cross Tool T13: 120-3,000 RPM Offset From Guide Bushing T10 & T11: 0.472" (.397 MAX. SHANK) Offset From Guide Bushing T12: 0.965" (.511 MAX. SHANK)
Equipped With (To be confirmed by Buyer): Iemca Mini Boss 325 magazine Bar Loader, tower light Full C-axis main spindle 15 - degree sub-spindle High pressure coolant
|